The X-1R Corporation X-1R Engine Treatment Concentrate

X-1R Engine Treatment treats cylinder walls, bearings, cams, rings and valve guides. It creates a molecular bond with ferrous metal, which leads to a dramatic reduction in friction and wear. X-1R also protects against the harsh metal-to-metal contact that commonly occurs during “cold starts”. 

Benefits:

  • Helps increase engine life
  • Helps increase horsepower
  • Helps improve fuel economy
  • Helps improve overall performance
  • Helps protect during cold starts
  • Helps dramatically reduce friction
  • Helps reduce operating temperature
  • Helps reduce wear
  • Helps reduce engine noise and vibration
  • Helps protect metal surfaces from galling should lubrication be lost
  • Compatible with most synthetic and mineral-based oils
  • 100% concentrate additive is cleaner
  • Will NOT void manufacturer’s warranty

X-1R has stood up to rigorous testing by: Swedish National Testing and Research Institute, Oakland University-Dept. of Mechanical Engineering, The Falex Corporation, NASA, QC Laboratories, Herguth Laboratories, Morgan McClure Racing, Elliott Brothers Racing and the Hav-A-Tampa Dirt Series. (Full reports available upon request).

 

 

Available Sizes: 12 oz, 64 oz




Directions for use: X-1R can be used in any gas, diesel or propane engine.

Initial Treatment: Add 8 oz. during oil change per 5 quarts or less of oil capacity.

Subsequent use: Add 4 oz. every oil change per 5 quarts or less of oil capacity.

NOTE: If your engine capacity is 6 quarts or greater, use 2 oz. per quart of oil capacity. Subsequent oil changes use 1 oz. per quart of oil capacity.